Triton, RTA tank with MTL RDL & DTL options, side air control, and liquid control

Triton is the newest addition to the GG family of atomizers.

Introducing Triton, an atomizer with more features than other atomizers that have side airflow.

Triton is designed to give users more freedom. It offers side air control and liquid control, so it won’t leak even if you place the body in an upright position when removing it to check the deck.

We have made improvements such as:

1. The exit pin reduces the amount of air AFTER the resistance, and is designed so that the user does not need to remove the atomizer body in order to push the pin out, but only needs to remove the mouthpiece.

2. The posts on the deck are made like those of Caspardina. They hold all wires without any problems, even those with the smallest diameter. The deck also allows you to easily place the wire in position before tightening the screws that hold it in place.

3. The body does not separate from the base when you turn it all the way to the right or all the way to the left, so you avoid accidentally separating the body from the base while storing your Triton in bags, pockets, etc.

4. The deck does not have O-rings that can be damaged, but only large and thick ones at each pivot point.

5. The refill cap has no notches but is embossed with the company logo and horizontal lines.

Starting with a complete description of each part:

Mouthpiece: Black, curved, with heat sinks to prevent overheating. The users also has the option of replacing it with any other of their choice. If the user wishes to use a different drip tip, the exit pin cannot be installed unless the specific drip tip has a 5.5mm hole.

Refill cap: The refill method is really easy. Unlike atomizers where you have to remove up to 2 caps to refill, Triton makes the process much more easier. There is no need to screw or unscrew the cap, just turn it until it stops. Consequently, after filling, half a turn is enough to lock the cap, and to refill, half a turn and a pull on the cap is enough to open it.
The refill cap is not simply engraved but EMBOSSED, which is particularly difficult to manufacture, costly, but very beautiful.

Main body: It is made of glass, trapped between two metal parts.

Air adjustment: Triton does not work with air pins like other atomizers on the market but with large pieces (let’s call them “bells”), that cover the deck and can be changed at will, therefore you cannot lose them and of course you do not need to search for the same two plates that you need to place to change the air flow. Of course, as with all Golden Greek atomizers, there is no need to empty the liquid from the tank or cause damage to the resistance.

The bells are not simply engraved but EMBOSSED, something special, difficult to manufacture, costly but very beautiful.The bells have holes with the following diameters:

MTL: 0.8mm each hole, so it’s like vaping from a 1,2mm hole, i.e. air from a hole with an area of 1 square millimeter.
RDL: 2.5 mm per hole, so it’s like vaping from a 3,5 mm hole, i.e., air from a hole with an area of 10 square millimeters.
DTL: Openings that are not exactly holes. It’s like vaping from a 5,5mm hole, i.e. air from a hole with an area of 24 square millimeters.

The hole in the DTL option is a single opening, yet it is divided into three parts. The two upper holes hit the coil at its center, while the last hole hits the coil almost at its bottom. As a result, the coil is almost entirely surrounded by air, leading to enhanced flavor.

The standard GG Triton package includes all the bells for typical MTL, RDL, and DTL vaping styles.

Exit Air Pin: It is widely accepted that air plays an important role in taste. The taste depends on the amount of air as well as the way it hits the resistance. That is precisely why we brought air pins to the market. What is not yet so well known is that the way the air is moved away from the coil is also crucial, especially in MTL vaping style. That’s why we created a pin with a specific air hole above the coil. This way, the air will pass through this specific hole before reaching the user’s mouth, a hole of 3.5mm in diameter.

A question that arises from all of the above is why the air leaving the coil is so important. This is because, depending on the exit pin, the amount of air that will “envelop” the resistance wire changes. This is considered a key factor in changing the taste.

You can add or remove the exit pin without coming into contact with the liquid.

To remove the Exit Pin:

The exit pin is located on the mouthpiece of Triton. To remove it, simply remove the mouthpiece and then push it in any direction.

To add the Exit Pin:

Simply push it into the mouthpiece without removing anything from Triton.

Liquid Control System: Simply twist the body of the Triton and the liquid holes are exposed or hidden.

Bells: One outstanding feature is the top of each bell which is much smaller than the rest of the chamber. This allows moisture to condense before it reaches your mouth.

The MTL and RDL bells have two feed holes, each with a diameter of 1.5mm, while the DTL chamber has two feed holes, each with a diameter of 2mm.

Deck: The deck has been sandblasted to remove any machining marks and looks really nice.

The liquid feed is direct, allowing the wick to be fed more quickly and efficiently. The deck has 2 screws that hold the wire in place.

A great feature of Triton is that the base and negative pole are one piece, so there is no fear of the base unscrewing from the negative pole while removing Triton from your mod.

The positive and negative poles are positioned at an angle. This makes it much easier to place your wire in position and/or use longer coils.

IMPORTANT NOTICE: ALWAYS CLOSE THE LIQUID CONTROL BEFORE REFILLING.

Triton Features:

Diameter: 22mm
Height: 41mm (without mouthpiece)
Mouthpiece height: 13mm
Material: 316 stainless steel L
Transparent tank material: glass
Material between poles: PEEK
Serial number from 000 to 450

The package includes:

1 x Triton (MTL bell is installed)
1 x Exit Pin (is installed)
1 x RDL bell
1 x DTL bell
1 x set of o-rings + 1 x set of screws

TIPS AND TRICKS:

Do not disassemble Triton’s deck because all parts are press-fitted together.

Do not attempt to remove the plastic under the 510 positive pole.

If you remove the body to check your resistance and need to put it back in place, simply push it onto the base. The direction of the air holes should be perpendicular to the resistance.

Making the resistance:

Place the cotton and cut it exactly to the diameter of the deck.
Also fluff up the cotton so that the feeding pins can fit inside it.

You can purchase the following replacement parts:

Positive pin (gold plated)
Glass
Exit pin
Set of replacement o-rings and wire retaining screws

It is a Golden Greek product, so treat it well, you deserve it!