Taifun Skarabäus Pro Max 25mm 21700 by Smokerstore – Classic

Taifun Skarabäus Pro Max by Smokerstore
Product information “Taifun Scarab Pro Max ”
Taifun® Scarab Pro Max – The high-end battery carrier for demanding users – Powered by Taifun® patented Magneto Switch. Now new in the improved 2023 version !
The new Taifun® Skarabäus Pro Max has been visually revised and adapted to the Taifun vaporizers. The 25 mm Pro Max version has the ribbing to match Taifun® GT IV (2023) and Taifun® GT V. In addition, the electronics were installed horizontally, which gives the user the option of refining their own scarab in a variety of ways to be individualized. Furthermore, it is now a little shorter than its popular predecessor. From a purely technical perspective, of course, everything remains as usual. Please note that the cones and sleeves of the predecessors are not compatible with the new scarab.
This battery carrier is characterized by its relatively simple operation, which eliminates the usual disadvantages of a mechanical power button, as is usually found in an unregulated mechanical battery carrier. The relatively high on-resistance and increased wear on the button with larger currents are eliminated in our device. Through a patented in-house development of our magnetic-optical button, “Magneto” for short, we have succeeded in designing a button that is not subject to wear and that moisture cannot cause ANY damage.
With a 12 month manufacturer’s warranty on the electronics.
Brief overview of the device features of the Taifun® Scarab Pro Max
Microprocessor controlled
New wear-free magneto-optical button (patented light barrier technology)
Switch-off after 15 seconds of continuous “pressure” as security against unintentional operation. However, you can extend the duration of vaping by briefly interrupting it (less than 1s)!
To activate it again, the battery cover must be loosened and tightened again.
Electronic key lock for short-term deactivation of the button. If you leave it unattended, please remove the battery!
High-performance MosFet (power amplifier) with 0.001Ω switching resistance in operation!
Temperature sensor for the MosFet to protect the device during continuous operation at extreme currents.
Lo battery voltage signaling from 3.0V to 2.6V (shutdown).
Electronic overload protection of the MosFet (detection of possible overload, R winding << 0.1Ω). Additional electronic control of the switching function of the MosFet for voltage drops when switched on, as well as for incorrect voltage when switched off on the evaporator. Mechanical reverse polarity protection thanks to a new type of battery cap, which prevents immediate and permanent vaping in the event of reverse polarity! Outer diameter: 25mm, inner diameter: 22mm Material: stainless steel (1.4301) Total length: 21700 battery - 92.5 mm Operation with: 1x 21700 battery each LED in the sleeve visually signals the device status removable cone Positive pole: rigid, not sprung You can activate an electronic key lock by quickly pressing the button five times. This is briefly signaled by the red LED! The lifting happens in the same way and is signaled in the same way. scope of delivery 1 x Taifun® Scarab Pro Max battery carrier 1 x Instructions for use